|
How fast can a gilera ice go?
Messages 261
to 280
of
356.
< Previous
1
...
8
9
10
11
12
13
14
15
16
17
18
Next >
 |
How fast can a gilera ice go?
21 February 2008, 8:05 AM
|
big bear
Joined 15 Oct 2007
44 posts
|
|
HI, YES I DO KNOW WHATS WRONG,WHEN YOU PUT THE BIG BORE KIT ON YOU MAY HAVE TURNED THE OIL UP I HOPE?,IF YOU DID OR IF YOU HAVE NOT THEN YOU WILL NEED TO GIVE IT SOME MORE OIL,WHEN YOU TURN IT UP LOOK AT THE MARKER AND MAKE SURE YOU SEE A 5MM /6MM GAP,DO NOT RUN IT UNTILL YOU HAVE DONE THIS BECAUSE YOU PISTON WILL SEIZE UP AND YOU WILL HAVE BIG PROBLEMS ON YOUR HANDS,IF THERE IS NO OIL GETTING THOUGH THEN I WILL TELL YOU NEXT TIME WHAT TO DO,BEFORE YOU DO WHAT I FIRST SAID MIX A LITTLE OF OIL IN THE TANK THAT WAY YOU WILL KNOW YOU HAVE TO TURN THE OIL UP LIKE I SAID,RUNNIG IN WILL BE ABOUT 200 /500 MILES,I HOPE THIS HELPS,HAVE FUN BIG BEAR.
|
How fast can a gilera ice go?
21 February 2008, 10:18 AM
|
speedfreakice
Joined 25 Jan 2007
25 posts
|
hi thanks big bear
thank god its not siezed up (just checked it) you said to turn the oil up. how do i do that? is it an adjustment on the carb? or the oil pump itself? shall i put some oil in direct with the petrol for now. like 40:1 mix?
thanks
|
How fast can a gilera ice go?
21 February 2008, 2:46 PM
|
big bear
Joined 15 Oct 2007
44 posts
|
|
HI,YES MIX IT IN THE TANK FOR NOW,FOR MORE OIL YOU WILL FIND ON THE RIGHT HAND SIDE OF THE SCOOTER AT THE CRANK CASE,LOOK AT THE CRANK CASE AND ON THE LEFT OF THE CASING YOU WILL SEE A BLACK PLASTIC A SIZE OF A FIFTY P,PULL IT OUT AND LOOK IN SIDE,YOU WILL SEE THAT A CABLE RUNS INTO IT THE ONE AT THE LEFT HAND SIDE YOU WILL SEE THIS ON THE OUTSIDE,I THINK ITS A 10MM SPANER YOU WILL NEED UNSCREW IT AND YOU WILL SEE THE CABLE MOVE IT INSIDE THE CASING,REMEMBER I SAID 6MM,IT WILL SMOKE IF YOU HAVE PUT OIL IN THE TANK AS WELL FOR A LITTLE TIME,BUT WILL CLEAR WHEN YOU REFILL WITH MORE PETROL,I HOPE THIS HELPS,HAVE FUN BIG BEAR.
|
How fast can a gilera ice go?
15 March 2008, 12:58 PM
|
Doni
Joined 27 Mar 2007
11 posts
|
hi, can you please email me and tell me what rollers to get with a zx pipe im really not sure?
|
How fast can a gilera ice go?
15 March 2008, 1:41 PM
|
tamoh
Joined 12 Jun 2006
11 posts
|
|
Wow i haven't checked this forum in a very long time!
Doni,
I had leo 5.1grm with mine, but that was in 2006 so i dont know if its been updated at all, They gave it amazing accelaration in and around towns and the top end, even though it wasn't the best, it was still something to be proud of!
|
How fast can a gilera ice go?
15 March 2008, 3:01 PM
|
big bear
Joined 15 Oct 2007
44 posts
|
|
HI,YOU WILL NEED TO REPLACE THEM WITH 4.2,I HOPE THIS HELPS BIG BEAR
|
How fast can a gilera ice go?
15 March 2008, 3:10 PM
|
big bear
Joined 15 Oct 2007
44 posts
|
|
HI,SOUDS OK YOU WILL FIND IF YOU ARE NOT GETTING AS MUCH OR A LITTLE FLAT TOP END THEN 5.1 ARE FINE,I WOULD CHANGE THEN TO 4.6 OR 4.8,YOUR GEAR CHANGE WILL BE A HIGHER REV BUT WILL STILL BE SAFE WITH OUT ANY HARM,GO ON YOU KNOW YOU WANT TO,BIG BEAR
|
How fast can a gilera ice go?
15 March 2008, 3:36 PM
|
Lonan
Joined 17 Jan 2008
90 posts
|
|
Hi big bear, the guys fitting my exhaust are having problems, they tried your recommendations, well 4.7 rollers and 78 jet, but they are still having probs it flies up to 30mph then dies off not getting the second boost, there gonna try it with out boost bottle but dont think its the problem, do know what could be causing the it.
|
How fast can a gilera ice go?
15 March 2008, 4:22 PM
|
big bear
Joined 15 Oct 2007
44 posts
|
|
HI,IS IT FULLY DERISTRICTED AS IT SOUND LIKE ITS NOT,IF YOU DON'T KNOW HOW TO THEN EMAIL ME,KIND REGARDS BIG BEAR
|
How fast can a gilera ice go?
16 March 2008, 1:31 PM
|
Lonan
Joined 17 Jan 2008
90 posts
|
|
It is fully derestricted and fully tuned with all Malossi parts MHR 70cc kit, MHR crankshaft, MHR bearings, MHR manifold, and being fitted with MHR race exhaust. Malossi delta clutch, gear up kit, torque driver, kevlar belt, variator, cdi, race reed blocks, 21mm carb, race air filter, boost bottle.
 |
FOR SALE
Sym Jet 50. £675
Heacham, Norfolk, UK
|
|
 |
FOR SALE
50cc scooter
Walsall, West Midlands, UK
|
| |
 |
FOR SALE
peugeot speedfight 2
Sheffield, South Yorkshire, UK
|
|
 |
FOR SALE
gilera runner,50cc.53 reg,2003.
Tipton, West Midlands, UK
|
|
| |
| [More mopeds and scooters ads...] |
|
How fast can a gilera ice go?
16 March 2008, 2:28 PM
|
Doni
Joined 27 Mar 2007
11 posts
|
thanks alot big bear, and what size air filter shoud i get? and do you know any good website were i can order a zx pipe, and last question, what eles do u recomend i do to my gilera ice, im putting rollers on it, zx pipe, and a new air filter. is there anything eles that will improve my gilera?
|
How fast can a gilera ice go?
16 March 2008, 3:18 PM
|
big bear
Joined 15 Oct 2007
44 posts
|
|
HI,HAVE YOU LOOKED INSIDE THE EXHAUST AND REMOVED THE WASHER AND ALSO THE PEICE OF PIPE INSIDE THE MUFFLER ?,IT HAS TO HAVE A RESTRICKTER,LET ME KNOW BIG BEAR,AND THE JET WHAT SIZE HAS IT?
|
How fast can a gilera ice go?
16 March 2008, 3:21 PM
|
Doni
Joined 27 Mar 2007
11 posts
|
hi, yeah i have done all that, but im really not sure what jet size i hae, how could i find out?
and can you tell me any good websites where they sell zx exhuasts
|
How fast can a gilera ice go?
16 March 2008, 3:42 PM
|
big bear
Joined 15 Oct 2007
44 posts
|
|
HI,IT WILL MAKE A DIFFERENCE IF YOU HAVE THE WRONG SIZE JET,AS THE PETROL WILL NOT GET THROUGH,THIS IS A MUST OR YOUR SPEED WILL BE SLOW,AS FOR THE FILTER I USE ADDRENALINE FOR PARTS,GREAT WEBSITE AND VERY NICE GUYS YOU CAN TRUST,A REED VALVE BLOCK WILL HELP £24.99 AND A CDI UNIT TO GIVE YOU MORE REVS AND SPEED,HAVE FUN BIG BEAR.
|
How fast can a gilera ice go?
16 March 2008, 3:51 PM
|
Doni
Joined 27 Mar 2007
11 posts
|
thanks for that, but im still readlly not sure how i check if i have the correct jet size can you tell me where i can check ?
|
How fast can a gilera ice go?
16 March 2008, 4:59 PM
|
big bear
Joined 15 Oct 2007
44 posts
|
|
HI,LOOK INSIDE YOUR CARB,UNDO THE TWO SCREWS AT THE BOTTOM OF THE CARB WHERE THE FLOAT IS YOU WILL SEE A BRASS SCREW WITH A NUMBER ON, A STANDARD ONE WILL SAY 56,THIS IS VERY SMALL 68 IS A GOOD SIZE AND WORK WELL,IF YOU HAVE NOT CHANGED IT THEN IT WILL BE A MAX OF 58 WHICH IS USELESS AND YOU WILL NOT GO OVER 35 MPH,I HOPE THIS HELPS,BIG BEAR.
|
How fast can a gilera ice go?
16 March 2008, 5:43 PM
|
Doni
Joined 27 Mar 2007
11 posts
|
would you be able to show me a picture as im not sure how to get there?
|
How fast can a gilera ice go?
17 March 2008, 10:01 AM
|
big bear
Joined 15 Oct 2007
44 posts
|
|
HI, ON THE LEFT HAND SIDE YOU WILL SEE A PLASTIC BLACK BOX IT IS ON TOP OF YOUR CRANKCASE THAT YOUR BACK WHEEL IS ON,IT IS CALLED AN AIR BOX,UNDO THE 5 I THINK SCREWS AND YOU WILL SEE A SPONGE FILTER TAKE IT OUT,THE LARGE PEICE OF PLASTIC THATS ON TOP WILL NEED TO COME OFF AS WELL IT HAS 2 SCREW HOLDING IT 1 ON THE RIGHT AND ONE ON THE LEFT,TAKE THEM BOTH OUT AND REMOVE THE LARGE PEICE OF PLASTIC,THEN YOU WILL SEE THE CARB AND JUST DO WHAT I SAID IN MY LAST EMAIL,HOPE THIS HELPS,HAVE FUN BIG BEAR.
|
How fast can a gilera ice go?
17 March 2008, 10:53 AM
|
Lonan
Joined 17 Jan 2008
90 posts
|
|
Il get them to check, but would the exhaust really have a restricter as its for race use, it had an 88 jet in it with the old pipe and that worked fine. they have tried diff jets and rollers.
|
How fast can a gilera ice go?
17 March 2008, 7:04 PM
|
big bear
Joined 15 Oct 2007
44 posts
|
|
HI, ? YES ALL COME WITH TWO RESTRICTERS IN,THIS IS THE LAW,I CALL IT *!#%!@,IT'S TO PROTECT ALL SALESMAN,IF YOU DECIDE TO REMOVE THEM AND GO FASTER THEN YOUR PROBLEM NOT THE SALESMAN,EVERYONE KNOW YOU DON'T JUST WANT TO LOOK AT IT,I 22 YEARS AGO DONE THE SAME THING AND THEN REMOVED BOTH OF THEN AND ALMOST CAME OFF NEVER AGAIN,SO TAKE CARE AFTER REMOVING THEN,HOPE THIS HELPS BIG BEAR.
Messages 261
to 280
of
356.
< Previous
1
...
8
9
10
11
12
13
14
15
16
17
18
Next >
Important Note
All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.
You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.
|
