|
Kinroad XT50
Messages 381
to 400
of
497.
« Previous
1
...
14
15
16
17
18
19
20
21
22
23
24
25
Next »
 |
Kinroad XT50
21 October 2008, 10:06 PM
|
olver
Joined 11 Feb 2008
17 posts
|
hi it takes 10w-40w 4 stroke oil i have a tub of 900ml of it if you wont it i have used a little so it has got 800ml now, but i can post it to u for £5 saves paying full prices.cheers Aaron olver
|
Kinroad XT50
21 October 2008, 11:56 PM
|
Diver
Joined 22 Sep 2008
2 posts
|
Hi guys, some assistance if you dont mind.
I bought an xt50-18 for my son which has been nothing but trouble.
New CDI unit, new coil & a nice new NGK spark plug.
All been working for about 1 week. Now it wont start.
Turns over O.K. Checked spark plug, sparking well, smell of fuel, assume all O.K.
Took the magneto off & it seems to be soaked in oil & water. Would appear as though the gasket was never sealed very well. Would this be the reason for it not to start, or should I look for something else?Cheers
|
Kinroad XT50
22 October 2008, 0:01 AM
|
stevie12345
Joined 22 Jul 2008
20 posts
|
>Hi guys, some assistance if you dont mind.
I bought an xt50-18 for my son which has been nothing but trouble.
New CDI unit, new coil & a nice new NGK spark plug.
All been working for about 1 week. Now it wont start.
Turns over O.K. Checked spark plug, sparking well, smell of fuel, assume all O.K.
Took the magneto off & it seems to be soaked in oil & water. Would appear as though the gasket was never sealed very well. Would this be the reason for it not to start, or should I look for something else?
Hi, try this, http://www.hypermotos.com/helpGB.html
I would look at the exhaust valve first,
|
Kinroad XT50
25 October 2008, 0:19 AM
|
rbs
Joined 25 Oct 2008
3 posts
|
interested in varios parts can u email me
engine and box
sprockets and chain
chain guard
|
Kinroad XT50
25 October 2008, 0:24 AM
|
rbs
Joined 25 Oct 2008
3 posts
|
yes
|
Kinroad XT50
25 October 2008, 1:36 PM
|
wombat
Joined 25 Oct 2008
1 posts
|
Hi TERRYH
I AM ALSO A PRELOVED VIRGIN!! HAVING HELLANALL PROBS WITH MY SONS BIKE SO COULD YOU PLEASE SEND ME A COPY OF THE ASSEMBLY INSTRUCTIONS ( [Log in to view email]
|
Kinroad XT50
25 October 2008, 1:51 PM
|
olver
Joined 11 Feb 2008
17 posts
|
hi
i have the sprokets front and back and the chain gurad all in good condition. do you wont the whole engine or parts of it also what do you mean by boxcheers
|
Kinroad XT50
26 October 2008, 7:31 AM
|
TERRYH
Joined 10 Apr 2008
33 posts
|
|
hihave sent hope this is O K REGARDS
TERRYH
|
Kinroad XT50
26 October 2008, 7:57 PM
|
Nibzy
Joined 4 Aug 2008
2 posts
|
If you have a smell of fuel from the exuast and a spark it should ignite. Whether it's the correct sequence i.e.before top dead centre on compression or not or just a backfire due to it being out of sequence. The magneto plays a part in the firing system so soaked in oil/water will cause problems. It needs to be dried out in any case if it is not the problem. If you need to adjust the valve clearance, make sure it is top dead centre on the firing stroke (both valves shut). I find it easiest to undo the lock nut adjust the screw a turn or so (easier to put the feeler gauge in, put a 0,05 mm feeler gauge and adjust the screw until it just grips the feeler (use fingers to avoid overtightening), then tighten the lock nut. When you tighten the locknut this opens the gap slightly, the feeler should slide back and forth with some resistance which is correct. If too tight or slack go through the process again. Other than this I cant think of what it could be as you have fuel and spark it should do something
|
Kinroad XT50
27 October 2008, 8:01 PM
|
nigel
Joined 27 Oct 2008
2 posts
|
Hi, son has kinroad xt50gy clever tiger dirt/enduro type bike, wants to upgrade front and rear sprockets, anyone know where to get them? Wants 15 or 16 tooth front and 48 tooth rear currently has 420 chain with 14 tooth front and 58 tooth rear. Thanks
|
Kinroad XT50
2 November 2008, 5:29 PM
|
andy
Joined 2 Nov 2008
2 posts
|
hi terry could you please send me a copie of thr xt50 manual regards andy.my email address is [Log in to view email]
|
Kinroad XT50
3 November 2008, 8:57 PM
|
olver
Joined 11 Feb 2008
17 posts
|
HI EVERYONEI AM BREAKING MY BLUE KINROAD XT50 DOWN FOR PARTS IF YOU WOULD LIKE ANYTHING PLEASE LET ME KNOW CHEERS AARON
|
Kinroad XT50
4 November 2008, 12:02 PM
|
mikem
Joined 2 Aug 2008
9 posts
|
Hi all/especially TerryH
I have a 50cc 2005 moped,All has been well up untill last week?The bike starts ok,but when i move off & open the throttle,It loses acceleration.I have replaced the oil,filled the tank with fresh petrol.But still the same problems happens??Could this be a fault with the carb or something else?please help,as i am lost with-out it.I bought the bike 2nd hand in august & this is 1st hiccup i have had with it.
many thanks
mike
|
Kinroad XT50
4 November 2008, 12:05 PM
|
mikem
Joined 2 Aug 2008
9 posts
|
Hi/
Is carb in good working order,as i think mine has died and gone to heaven?
mike
|
Kinroad XT50
4 November 2008, 4:50 PM
|
Biglew23
Joined 13 Sep 2008
11 posts
|
|
Hi Mike, does your bike have a manual choke or an auto? I know that my chopper does the same thing until the engine has warmed up a little. I have to play around with the choke for 60 seconds or so whilst revving until it can rev up without losing power. Once I set off it's absolutely fine. If you have an auto chock then this may be the issue as mine is manual and allows me to adjust it until it sounds and feels right.On another note I was about to set off from work today when the engine kept losing power and dying on me. After a few minutes of messing with the choke and getting nowhere I was starting to worry that the damp weather was the problem but then realised that I'd forgotten to turn the fuel tap to the on position DOH! I'm such a numpty sometimes.
|
Kinroad XT50
4 November 2008, 6:07 PM
|
mikem
Joined 2 Aug 2008
9 posts
|
Many thanks for your reply/
The bike i have got,is a moped{rev & goe}so the choke is automatic.It starts ok,but when i open the throttle,it just dies off & builds back up again?????????????
|
Kinroad XT50
5 November 2008, 6:21 PM
|
Biglew23
Joined 13 Sep 2008
11 posts
|
|
If the problem goes away after a few minutes of riding then it may be an issue with the auto choke not working properly. If it does it all the time even when the engine has warmed up then I'm not sure. On another note I got about three streets from my house today when the chain came off. I'd heard that they can get loose and need tightening on a regular basis. When I put the chain back on it was very loose so I'll have to read up on how to tighten it before I use it again. Thankfully it didn't break anything when it came off.
|
Kinroad XT50
5 November 2008, 7:25 PM
|
mikem
Joined 2 Aug 2008
9 posts
|
thanx biglew for your suggestions,I will have to leave it to the weekend,then i will have a good old fiddle about with it.
mike
|
Kinroad XT50
7 November 2008, 4:01 PM
|
Jordzzz
Joined 5 Mar 2008
4 posts
|
my kinroad xt 50 has a problem ..... the indecators won't work . anyone had this happen or know how to fix it ?cheers
|
Kinroad XT50
7 November 2008, 4:33 PM
|
rbs
Joined 25 Oct 2008
3 posts
|
Hi I didnt get any reply from my last email...have u still got the engine for sale? you can email me direct on [Log in to view email]
Messages 381
to 400
of
497.
« Previous
1
...
14
15
16
17
18
19
20
21
22
23
24
25
Next »
Important Note
All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.
You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.
|
