Heater Matrix

Messages 1 to 2 of 2.

Heater Matrix
21 July 2007, 7:35 PM

Charlie Boy
Joined 10 Jul 2007
29 posts

Could somebody please help me in locating the bleed screw that comes off of the heater matrix.I'm after draining the coolant to replace it with new one.I have just purchased the Peter Russek manual for the talbot express,and according to their diagram there should be a bleed screw,but i still can't find it.My van is a 1992 2.0L petrol.Any help please.
Charlie.

Discussion Archived

Heater Matrix
3 August 2007, 10:24 AM

Jeremy
Joined 17 May 2007
16 posts

Hi Charlie, I recently had to drain and fill the coolant and have the same Peter Russek book. My 1972 Talbot 2L petrol Highlander does not seem to have this bleed screw. If it does it's in a silly place. I just refilled the system, started the engine and topped up as required to the correct level. Hav,nt had any problems and done 300 miles since then.
Jeremy

Discussion Archived

Messages 1 to 2 of 2.

Important Note

All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.

You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.

Not a member yet?

Why not join the fun for free! Members can sell their stuff completely free of charge, have searches prioritised for their local area, and lots more.

Join for free | Member Log In

More discussion in
Motoring:

Heater Matrix

Important Note

Not a member yet?

Preloved Services

Most Popular

More