Send to a friend

rear brakes..

Messages 1 to 3 of 3.

rear brakes..
29 July 2007, 9:48 AM

Greg-the-peg
Joined 10 Aug 2006
93 posts

hi, how do you take the rear drum off? i looked but im a bit stupid and not quite sure where to start?

thanks

Discussion Archived

rear brakes..
16 August 2007, 8:37 PM

Scott Portsmouth
Joined 26 Jun 2007
8 posts

Hi Greg, should be quite straight forward - haven't done the rear drums but I've done the fronts and looking at the manual they look the same.
There should be be two bolts (one normal and another to allow location on the wheel with a a pin on the bolt head) undo both and the drum should come off. If it's a little tight tap it with a rubber / wooden mallet to free it off (don't hit with a hammer as the drum is cast steel and it may shatter / crack)
Hope this helps,
Scott

Discussion Archived

rear brakes..
30 August 2007, 7:55 PM

DAVETHEMOD1967
Joined 27 Jul 2007
7 posts

HI, STRAIGHT FORWARD JOB, YOU NEED TO UNDO THE FOUR BOLTS AT THE REAR OF THE DRIVE SHAFT FLANGE AND THEN UNDO THE 19MM NUT AND MAKE SURE YOU RENEW THE BOLT, THEN GET A 3 LEGGED HUB PULLER AND ALSO UNDO THE 2 HUB PINS AND VOILA!!

Discussion Archived

Messages 1 to 3 of 3.

Important Note

All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.

You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.

Not a member yet?

Why not join the fun for free! Members can sell their stuff completely free of charge, have searches prioritised for their local area, and lots more.

Join for free | Member Log In

More discussion in
Motoring:

rear brakes..

Important Note

Not a member yet?

Preloved Services

Most Popular

More