Rover 414

Messages 1 to 3 of 3.

Rover 414
24 April 2008, 3:33 PM

JJ
Joined 24 Apr 2008
2 posts

Hi! my water tank reservoir keeps boiling and overflows out of cap valve the fan kicks in and the boiling stops. There does not seem to be any goo on my oil stick or oil cap can anyone help
Regards
JJ

Discussion Archived

Rover 414
24 April 2008, 6:57 PM

tjp
Joined 15 Jun 2007
462 posts

there are dozens of letters like yours on this subject. have you done anything to the vehicle recently?
it could be an air lock, or a faulty cap, and there are a lot of posts on a sticking ball-bearing in the inlet manifold.
also, a head gasket can go between the cylinder and the oil holes, so you won't always see the oil and water mixing.
i would advise reading the previous posts on this first.

Discussion Archived

Rover 414
24 April 2008, 10:50 PM

JJ
Joined 24 Apr 2008
2 posts

Thankyou I will check your suggestions and look on the forum board I didn't realise there was a bearing in the 414 series
cheers
JJ

Discussion Archived

Messages 1 to 3 of 3.

Important Note

All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.

You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.

Not a member yet?

Why not join the fun for free! Members can sell their stuff completely free of charge, have searches prioritised for their local area, and lots more.

Join for free | Member Log In

More discussion in
Motoring:

Rover 414

Important Note

Not a member yet?

Preloved Services

Most Popular

More