rover 216 breaking problems

Messages 1 to 3 of 3.

rover 216 breaking problems
11 May 2008, 10:20 PM

oseman
Joined 11 May 2008
2 posts

have 216 and the break pedal keeps going to floor iv put a new master on it and it still going to the floor could it be the abs playing up

Discussion Archived

rover 216 breaking problems
11 May 2008, 11:09 PM

BrianM
Joined 11 Nov 2006
574 posts

Have you blead the system with all four bleed nipples open at the same time. If not then try it. You may find that one or two pumps are all that are needed. Have you reset the hand break & pads at all.

Discussion Archived

rover 216 breaking problems
12 May 2008, 11:08 AM

oseman
Joined 11 May 2008
2 posts

yeah i have andiv put new pads and discs all round but it still gos to the floor

Discussion Archived

Messages 1 to 3 of 3.

Important Note

All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.

You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.

Not a member yet?

Why not join the fun for free! Members can sell their stuff completely free of charge, have searches prioritised for their local area, and lots more.

Join for free | Member Log In

More discussion in
Motoring:

rover 216 breaking problems

Important Note

Not a member yet?

Preloved Services

Most Popular

More