406 air con
Messages 1 to 3 of 3.
light on dashboard works fan behind glove box working thing at front of engine pass side not wirring or cold to touch(not sure what it is or relevant) any tests i can do before garage in it
Discussion Archived
A simple but effective initial test is to check the temperature of the refrigerant system components and lines by touching them while the system is operating. With the engine at operating temperature and the air conditioning system switched ON, the touch test should reveal the following: A hot compressor. A hot high pressure refrigerant line from the compressor outlet to the condenser. A hot condenser on the inlet side. A warm condenser on the outlet side. A warm liquid line from the condenser to the evaporator (before the expansion valve or fixed orifice tube). A cold evaporator outlet line. A cold low pressure refrigerant line to compressor inlet. I hope this helps.
Discussion Archived
Discussion Archived
Messages 1 to 3 of 3.
Important NoteAll messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved. You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details. |
||||||||||||
Not a member yet?Why not join the fun for free! Members can sell their stuff completely free of charge, have searches prioritised for their local area, and lots more. Join for free | Member Log In |
||||||||||||
|
More discussion in