Follow this discussion by email | Send to a friend

Heat Control

Messages 1 to 4 of 4.

Heat Control
3 August 2008, 4:52 PM

Andy
Joined 3 Aug 2008
2 posts

I can only get hot air through my vents on a p reg Rover 414. Can anybody help as it is killing me in this hot weather not being able to get cold air, recently had a new water pump fitted and new head.

Reply to this message

Heat Control
3 August 2008, 5:33 PM

L.B.
Joined 5 Dec 2005
2848 posts

Not sure what model and engine type you have but I 'll take a stab that it might be a K series with you mentioning the head.
A lot of the rovers have a water valve that controls the flow to the heater matrix, this may be stuck open allowing hot water to circulate through the heater matrix.

___________________

THERE'S NO REPLACEMENT FOR DISPLACEMENT !

Reply to this message

Heat Control
3 August 2008, 9:53 PM

Andy
Joined 3 Aug 2008
2 posts

its a rover 414s 1396cc

Reply to this message

Heat Control
3 August 2008, 11:39 PM

BrianM
Joined 11 Nov 2006
510 posts

The heater valve is fitted to the bulkhead at the back of the engine. Two black heater hoses & a cable are attached. Get a pair of pliers on the tab where the cable is attached & pull/push it to its opposite position so as to shut the tap.

Reply to this message

Messages 1 to 4 of 4.

Important Note

All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.

You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.

Not a member yet?

Why not join the fun for free! Members can sell their stuff completely free of charge, have searches prioritised for their local area, and lots more.

Join for free | Member Log In

More discussion in
Motoring:

Heat Control

Important Note

Not a member yet?

Preloved Services

Most Popular

More