Preloved
ClassifiedsForumsReviewsMembersThe Joy of Second Hand

Fiat Multipla ABS light on HELP

Messages 1 to 1 of 1.


Fiat Multipla ABS light on HELP
4 August 2008, 1:29 PM
charris
Joined 4 Aug 2008
1 posts

I have tried to rectify ABS llight on dash staying on after start up.
Local garage diagnosis - NO SIGNAL FRON REAR DRIVERS SIDE SENSOR
have replaced sensor twice to no avail. Husband has checked for power which he says is ok. Can anyone point me in another direction. The rear hub is toothed but replacement parts are not - although existing toothed sensor ring has been cleaned and appears fault free. When rear hub removed half of the bearings remain on car - is this right? Also where can I get a hub with toothed ring on. Sorry for all questions but MOT due end Aug. Afraid to take to Fiat after reading some of the charges for non diagnosis of same problem.
Thanks for any help you can offer

Messages 1 to 1 of 1.

 

Important Note

All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.

You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.

Not a member yet?

Why not join the fun for free! Members can sell their stuff completely free of charge, have searches prioritised for their local area, and lots more.

Join for free | Member Log In