ax gear lever stuck

Messages 1 to 4 of 4.

ax gear lever stuck 11 November 2008, 8:36 PM

suepug Joined 14 Jul 2007 19 posts

ax gear lever stuck 11 November 2008, 11:48 PM

bigtony Joined 12 Jan 2005 750 posts

ax gear lever stuck 12 November 2008, 0:48 AM

suepug Joined 14 Jul 2007 19 posts

ax gear lever stuck 12 November 2008, 1:19 AM

Al's Pug Joined 7 Feb 2005 1735 posts

the base of the gear connecting rods is in the center of the car
depending how far she drove over the curb she may have grounded them too? or worsh when sh eclonked the sump it moved the engine and box and damaged an engine mount so the whole lot is not ligned up right, causing the gear rods and levers to be out of alignment.

anyway regardless of how, she need to fix this

get the car up in the air, ramps axel stands (Not a pile of bricks or a jack) ! and look at the linkages disconnect them at a join and then see if the rods to the box move or the ones from the shifter then depending on which is ok then proceed from there or re post answer for more advice.

Hope all goes well with this

Al


___________________

if it aint broke don't fix it !

Messages 1 to 4 of 4.

Important Note

All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.

You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.