inertia switch on multipla

Messages 1 to 2 of 2.

inertia switch on multipla
12 December 2008, 10:06 PM

nar31k
Joined 12 Dec 2008
1 posts

was wondering if any one could help i changed a injector on my WIFES fiat multipla and now wont turn over or start at all battery fine and everything lights up when turn key but stater dont hit in could it be the inertia cut off switch and if yes where is it ????????????????

Discussion Archived

inertia switch on multipla
13 December 2008, 9:37 PM

bigtony
Joined 12 Jan 2005
852 posts

doesnt sound like the inertia switch. i would still turn over if it was. ive done a few of these injectors on these fiats but never really had any problems. have you double checked everything you have done? you may have left a lead/wire off some where. it sounds like you may have a starter motor fault from how you describe it. starter motors are known to pack up at any time. if you can get to the starter connections. check them and get a test light and see if there is a trigger live to the trigger wire on the starter when its in the crank position.

Discussion Archived

Messages 1 to 2 of 2.

Important Note

All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.

You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.

Not a member yet?

Why not join the fun for free! Members can sell their stuff completely free of charge, have searches prioritised for their local area, and lots more.

Join for free | Member Log In

More discussion in
Motoring:

inertia switch on multipla

Important Note

Not a member yet?

Preloved Services

Most Popular

More