Citroen Xantia ABS faults
Messages 1 to 3 of 3.
Any fault-finding advice greatly appreciated. I have 1999 model, and the ABS lamp came on this morning.
Discussion Archived
2nd - if light comes on when you reach about 20 mph, then it is most likely a loose, fouled or badly adjusted wheel sensor. 3rd - if you have an LX model without abs (no sensors or wires visible, no ecu on plate in front of hydraulic resevoir) then the engine ecu is at fault. Ignore it, remove bulb, or pay £25 ish to have reset.
Discussion Archived
I found the problem the next day - the RHR sensor was open circuit. Like you said, they were all about 1100 ohms, except this one. When I got the rear disc off, I could see that the sensor housing was corroded and bulging. New sensor fitted, the light went out after 50 metres driving.
Discussion Archived
Messages 1 to 3 of 3.
Important NoteAll messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved. You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details. |
|||||||||||||
Not a member yet?Why not join the fun for free! Members can sell their stuff completely free of charge, have searches prioritised for their local area, and lots more. Join for free | Member Log In
Are you a fan of Preloved?
If so, why not help us spread the Joy of Second Hand by joining us on Facebook. [more...] |
|||||||||||||
|
More discussion in