Engine rattle on start up and switch off
Messages 1 to 7 of 7.
Sounds like the exhaust but had that checked and its fine, my next thoughts are engine mounts, the top one seems fine, is there a known problem with this? I also have another rattle/tapping sound which increases with revs and goes almost away when warm, after doing a few searches it sounds most likely the bottom crank pulley, I have ordered one and will get it fotted next week, just hoping I could identify whats causing the startup rattle so I coule get the parts ready to fit at the same time, Thanks
Discussion Archived
Discussion Archived
Do not leave this too long as swarf from the pulley starting to break up can enter the belt area and cause problems. However whilst the pulley is a bit pricey it's relatively easy to fit. ___________________ THERE'S NO REPLACEMENT FOR DISPLACEMENT !
Discussion Archived
Discussion Archived
Discussion Archived
Discussion Archived
Discussion Archived
Messages 1 to 7 of 7.
Important NoteAll messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved. You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details. |
|||||||||||||||||||||||||||
Not a member yet?Why not join the fun for free! Members can sell their stuff completely free of charge, have searches prioritised for their local area, and lots more. Join for free | Member Log In
Are you a fan of Preloved?
If so, why not help us spread the Joy of Second Hand by joining us on Facebook. [more...] |
|||||||||||||||||||||||||||



