Preloved
ClassifiedsForumsReviewsMembersThe Joy of Second Hand

xantia towbar advice

Messages 1 to 3 of 3.


xantia towbar advice
14 July 2009, 11:10 PM
pal
Joined 18 Nov 2008
15 posts

hi,ive just had a tow bar fitted to my xantia 1.8 xreg,and i need to know if it is fitted right ,it dos nt go along back of car but goes from ball under spair wheel and bolts (1) onto cross cection with may be 2 more bolts up into boot.it is bolted to rear chassi but only as isay behind ball its a anker tow bar fitted buy an old geezer (doin it 35 yrs etc).hope it si right ,any xantia owners info please.........pal.
Discussion Archived

xantia towbar advice
11 August 2009, 8:09 PM
Shel
Joined 24 Apr 2009
5 posts

It should be ok but mine did go from side to side and fitted thru the predrilled holes from Citroen. 3 holes doesn't sound like a lot to be honest, are you pulling much weight?

There are several designs about perhaps a quick search on Google may find other people who have the same towbar on and perhaps how many of that design have sold.
Good luck

Discussion Archived

xantia towbar advice
11 August 2009, 8:46 PM
pal
Joined 18 Nov 2008
15 posts

thanks shell,have since spoke to tow bar maker anker who say is perfectly fine ,but also that it is a pre 98 tow bar my xantia being a 2000 reg ,i think may have trouble at next mot as i think tow bars r now in test ,ta sean.
Discussion Archived

Messages 1 to 3 of 3.

 

Important Note

All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.

You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.

Not a member yet?

Why not join the fun for free! Members can sell their stuff completely free of charge, have searches prioritised for their local area, and lots more.

Join for free | Member Log In