gear linkage mod with O-ring problem

Messages 1 to 4 of 4.

gear linkage mod with O-ring problem 1 August 2009, 8:20 PM

Roder5 Joined 1 Aug 2009 2 posts

Hi
I recently decided to check thr O-ring in the collar that is screwed into the gearbox to check if it was worn(this is a popular mod to take the slop out of the gear change) and unfortunately disturbed the selector rod that enters the box. I have since not been able to position it correctly to select all the gears. Does anyone know if there is a procedure to set it in the right position?

gear linkage mod with O-ring problem 6 August 2009, 9:02 AM

george_hook Joined 17 Dec 2008 122 posts

If you email me I will send you detailed instructions on resetting the gear selectors.

Regards

George

gear linkage mod with O-ring problem 30 September 2009, 3:25 PM

vearon Joined 30 Sep 2009 1 posts

gear linkage mod with O-ring problem 20 October 2009, 2:17 PM

Roder5 Joined 1 Aug 2009 2 posts

Regards
Rod Murfitt

Messages 1 to 4 of 4.

Important Note

All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.

You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.