Follow this discussion by email | Send to a friend

freelander gear selection

Messages 1 to 2 of 2.

freelander gear selection
5 September 2009, 3:30 PM

bigmalc
Joined 12 Apr 2008
17 posts

i have a 1800cc freelander year 2000 having troubles selecting gears when its been running sometime seems very tight,reverse gear is even
harder its ok when its cold,anybody got any idears,would be greatfull for some help

Reply to this message

freelander gear selection
17 September 2009, 10:43 AM

Edited by geecoforum 17 September 2009, 10:48 AM

geecoforum
Joined 22 Jul 2009
1 posts

SOUNDS LIKE THE WRONG OIL HAS BEEN PUT IN YOU WILL NEED 2L SYNTHETIC TEXICO MTF94 / CASTROL SMX-S THESE OILS IS ARE THIN COMPAIRED TO THE OLD 75 80 90 STUFF ABOUT A 15 40 OR SO BUT WILL TAKE THE PRESSURE / LANDROVER STATE OIL WILL LAST BUT DONT BELIVE THEM AT 35 THOU AND AGAIN 70 A CHANGE IS A GOOD THING THE TRANVERSE BOX WILL TAKE THE GL5 1.1 L ALONG WITH THE BACK AXEL LESS TO GET ALL THE OIL IN BE TACKFULL WITH THE LEVEL OF THE VECH OR YOU MAY NOT GET THE RIGHT AMOUNT IN THIS IS BASED ON MY 03 GEAR SHIFT IS LIKE MAGIC REVERSE DONT ENGAGE UNLESS THE REVS ARE LOW
TRUST THIS HELPS

Reply to this message

Messages 1 to 2 of 2.

Important Note

All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.

You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.

Not a member yet?

Why not join the fun for free! Members can sell their stuff completely free of charge, have searches prioritised for their local area, and lots more.

Join for free | Member Log In

More discussion in
Motoring:

freelander gear selection

Important Note

Not a member yet?

Preloved Services

Most Popular

More