DIRECTION INDICATOR SOUND

Messages 1 to 3 of 3.

DIRECTION INDICATOR SOUND 5 September 2009, 6:57 PM

ABQAIQJOHN Joined 5 Sep 2009 2 posts

DIRECTION INDICATOR SOUND 11 September 2009, 0:57 AM

Al's Pug Joined 7 Feb 2005 1735 posts

I don't know of one commercially available, but you could easily make up something that would do the job .

Get a 2 x ordainary relays, the type you would use for say fog or spot lights, some cable + 2 inline fuses (2amp will do) and relevent connectors (2xearth rings, 2xthree way splice type connectors and 4x female spade type).

Take a wire from the switch side of each relay (with fuse) and splice 1 relay into left & the other relay to the right live indicator wires (you'll have to find and identify these wires coming out of the back of the steering column) and then connect the earth terminal to a suitable earth using the earth rings. Leave the load terminals of the relays un connected as you are not actually powering anything just using the switch to make and break, which when they do, will make an audible noise in time with the flashing lights.

If you put these inside a small card box and tape it securly out of the way up under the dash, you will hear the relays clicking each time the indicators opperate.
This clicking should be loud enough to hear unless you are really hard of hearing.

regards

Al


___________________

if it aint broke don't fix it !

DIRECTION INDICATOR SOUND 11 September 2009, 4:08 PM

ABQAIQJOHN Joined 5 Sep 2009 2 posts

Messages 1 to 3 of 3.

Important Note

All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.

You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.