Follow this discussion by email | Send to a friend

tork setting for fiesta rear hub

Messages 1 to 4 of 4.

tork setting for fiesta rear hub
30 September 2009, 3:44 PM

stewart
Joined 29 Aug 2009
13 posts

wot are the tork setting for a fiesta mark 2 rear hub . it has 4 nuts coverd in a steel cage. thanks stewart

Reply to this message

tork setting for fiesta rear hub
1 October 2009, 3:31 PM

fasty
Joined 27 Jun 2007
1491 posts

the hub centre nut is 235 Nm wheel nuts are 85 Nm

Reply to this message

tork setting for fiesta rear hub
1 October 2009, 4:44 PM

stewart
Joined 29 Aug 2009
13 posts

thanks for your help fasty will do it

Reply to this message

tork setting for fiesta rear hub
1 October 2009, 9:27 PM

shady
Joined 21 Jan 2008
116 posts

sorry for being miticulas but i thoght mk2 fiestas had a tappered wheel bearing that you nipped up and put the steel cage on after then the split pin as mk3's are 200+ nm with a big nut in the middle and four bolts on the back????

___________________

if ain't broke don't fix it

Reply to this message

Messages 1 to 4 of 4.

Important Note

All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.

You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.

Not a member yet?

Why not join the fun for free! Members can sell their stuff completely free of charge, have searches prioritised for their local area, and lots more.

Join for free | Member Log In

More discussion in
Motoring:

tork setting for fiesta rear hub

Important Note

Not a member yet?

Preloved Services

Most Popular

More