Pug 406 hdi Estate Towbar
Messages 1
to 5
of
5.
 |
Pug 406 hdi Estate Towbar
1 October 2009, 6:19 PM
|
norgrove
Joined 29 May 2006
24 posts
|
has anyone fitted the towbar themselves as require advice on how to get the nuts into the chassis as cannot work it out !
|
Pug 406 hdi Estate Towbar
5 October 2009, 1:54 PM
|
dave
Joined 19 Mar 2005
430 posts
|
If u mean the side bolts into the chassis there is special captive clips depending what year you have,some years have these clips fitted some don't.
|
Pug 406 hdi Estate Towbar
30 October 2009, 4:58 PM
|
tigger
Joined 18 Feb 2005
15 posts
|
|
if you have trouble with the tow bar give us a call on 01244 629170 thanks tony
|
Pug 406 hdi Estate Towbar
30 October 2009, 8:43 PM
|
norgrove
Joined 29 May 2006
24 posts
|
i've got the tow bar but cannot work out how (if right ones) to get bolts into chassis
|
Pug 406 hdi Estate Towbar
30 October 2009, 10:07 PM
|
tigger
Joined 18 Feb 2005
15 posts
|
|
hi if you look at the chasis you will have a square hole and a round hole insert the cage nut into the square hole and turn it 90 degress it will then click into place and alighn up with the round hole then you can insert the bolt and it will screw into the cage nut, also the holes for the two brackets at the back of the car are covered up by tape peugeot do this when they make the cars, before they underseal it
Messages 1
to 5
of
5.
Important Note
All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.
You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.
|
More discussion in