how do i adjust a pvc door
Messages 1 to 8 of 8.
i assume the door fits the frame etc but is catching either top bottom or sides ? If so... on the inside of the door by the hinges are normally plastic covers over a square section that extends from the hinge ? this depends on the make of door of course, if so remove these covers they normally fall off with a little finger pressure at the sides, in here you wil find the adjusting screws. suggest you sqwert some wd40 on them before you try to turn them. Normally a cross head screw. You will need to adjust all of them or you will distort the door and it wont swing righ tor locks match up etc. keep opening and closing as you adjust to make sure your going the right direction Al
can you upload a picture so I can see what it looks like ? thanks Al
ok when you can, I'm at a wedding Sat so earliest I can look at it would be Sun anway. Al
One, and simply taking up the slack on the others. If raising the door, I adjust the bottom hinge first, then the middle,and the top just until they bite ! Let me know how you get on
Messages 1 to 8 of 8.
Important NoteAll messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved. You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details. |
||||||||||||||||||||||||||||||||||
Not a member yet?Why not join the fun for free! Members can sell their stuff completely free of charge, have searches prioritised for their local area, and lots more. Join for free | Member Log In
Are you a fan of Preloved?
If so, why not help us spread the Joy of Second Hand by joining us on Facebook. [more...] |
||||||||||||||||||||||||||||||||||
|
More discussion in