dipped beam miss-ailgnment

Messages 1 to 2 of 2.

dipped beam miss-ailgnment 4 November 2009, 4:00 PM

midmod Joined 6 Mar 2005 91 posts

Some vauxhalls are fitted with a trimmer switch inside the car allowing you to adjust the beam angle, well not on the omega elite !

The idea is, if you hitch up a heavy load , trailer or caravan for example the back of the car would be weighted down causing the front of the car to rise making your headlamps point upwards, The auto leveller has a sensor on the rear suspention close to the O/S rear wheel, i'm not sure if there is another sensor anywhere i.e. on the front, i have fround reference on ebay to VAUXHALL OPEL OMEGA XENON HEADLIGHT ECU GM 90 565 931 which i assume would be what the suspention sensor would report to prior to talking to the servo motor on the back of the headlamp unit.

Does anyone know where the headlight ECU is ? or if there is more than 1 sensor ? or can you shed any light on this problem at all before i start spending money

dipped beam miss-ailgnment 9 November 2009, 11:20 PM

midmod Joined 6 Mar 2005 91 posts

Messages 1 to 2 of 2.

Important Note

All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.

You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.