|
Baotian 50cc 4stroke help?
Messages 221
to 240
of
2749.
< Previous
1
...
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
...
138
Next >
 |
Baotian 50cc 4stroke help?
13 January 2005, 5:36 PM
|
benzippy
Joined 12 Jun 2004
9 posts
|
Fredrik,
It sounds like the battery, although the sidelights probably still come on, i'm pretty sure its the battery try the kickstart a few times and if it starts ride around for a few miles to charge the battery a bit or just charge the battery with a 12v battery charger for about half an hour.
ben
|
Baotian 50cc 4stroke help?
13 January 2005, 7:13 PM
|
Fredrik
Joined 11 Jan 2005
2 posts
|
The battery has been charged and and sadly I can't get the engine running with the kickstart. Any suggestions?
|
Baotian 50cc 4stroke help?
15 January 2005, 2:54 PM
|
lynda
Joined 13 Jan 2005
22 posts
|
just got this scooter it all seems fine running but when i sit on it it cuts out... any help much appreciated. only just put it together today.
|
Baotian 50cc 4stroke help?
15 January 2005, 3:43 PM
|
Mac42
Joined 26 Dec 2004
7 posts
|
Check on top of the carburetta...there is a black pipe , check that there is no hole in it ........
|
Baotian 50cc 4stroke help?
15 January 2005, 5:05 PM
|
lynda
Joined 13 Jan 2005
22 posts
|
thanks but it seems to be the fuel isn't getting through the pipe, just drips and drabs to make it tick over, but not enough to get it going? anyone else had this problem with this bike
|
Baotian 50cc 4stroke help?
15 January 2005, 5:19 PM
|
Mac42
Joined 26 Dec 2004
7 posts
|
Have you tried the fuel filter up the side near the rear wheel ...it may need cleaning
|
Baotian 50cc 4stroke help?
15 January 2005, 6:21 PM
|
lynda
Joined 13 Jan 2005
22 posts
|
its a brand new bike so shouldn't need cleaning - will have a look tommorow and post the outcome - it just seems to be the fuel does not flow through the fule pip, just drips, we took the pipe off and this seems to be the problem but as its new we are not sure - bound to be teething problems so any help appreciated. will come back on line tommorow when had a mess about with it thanks for your help
|
Baotian 50cc 4stroke help?
16 January 2005, 4:50 PM
|
lynda
Joined 13 Jan 2005
22 posts
|
got a new boatian bt50 - 9. there is a problem with the fuel not coming through, does anyone know if this bike has a fuel reserve tap of some sort? the fule just drips through and think this is why is cuts out, so have not even been able to ride the bike. it ticks over okay but then cuts out as it does not seem to be getting the fuel. anyone had this problem and how is it rectified?
|
Baotian 50cc 4stroke help?
17 January 2005, 2:45 PM
|
slazaris
Joined 12 Nov 2004
5 posts
|
About the fuel gauge that quite some people have problems.
1) The gauge is not very accurate. It stays almot still quite high for about 50 km and then it drops very rapidly. But when it reaches the red area, it has about 2.5 L in the tank, which means that after 150 km (this is when it reaches the red area) there is almost 1/3 of the fuel still inside the tank. So, I suggest that you should re-fuel without much anxiety when the gauge reaches the red area and generally, the mileage is about 200 km.
2) I faced problems with the gauge indicating always empty or full. In both cases the problem is the same. The plastic moving part that flows inside the tank on the fuel surface and indicates the fuel level gets stuck on the walls of the tank because it's not properly fit. So, the solution is to take out the seat and reach the fuel tank. At the top of the tank you can see a black wire coming out, this is the fuel gauge wire. Right under that is the fuel gauge part that needs to get refitted right. I strongly suggest that you do this with the tank half full, because otherwise you may think the indication (empty or full) is right.
Hope this helps. Also, I 've noticed that a member said that apart from the brass screw there is an addtional electronic restrictor that is connected to the CDI. I would appreciate more info on how to do this.
I have also posted the solution to the fuel gauge to the forum
http://www.baotian.tk
I think it's best to contribute to that forum because it has categorized topics and not a flat structure like the preloved. Anyway, it's your choice.
|
Baotian 50cc 4stroke help?
17 January 2005, 10:08 PM
|
wappan
Joined 10 Jan 2005
5 posts
|
Hi everyone
I removed the brass pin inside the top cap of the carb and it has improved the speed, i reached a little under 40mph, and pulls of a little better, but scince removing pin have had trouble with it stalling and have come to the conclusion that it may be flooding the engine. can anyone share any light on this please and if possible email me the manual as the link for the manual isnt working [Log in to view email]
many thanks
Kevin
|
Baotian 50cc 4stroke help?
17 January 2005, 10:12 PM
|
wappan
Joined 10 Jan 2005
5 posts
|
Hi linda
your fuel line has an automatic tap, when engine is running, there is a second pipe which causes suction which allows the tap to open , I too are having stalling problems and i am thinking it is flooding (only happened scince i removed the pin in top of the carb), ill let you know if i come up with anything.
Kevin
|
Baotian 50cc 4stroke help?
18 January 2005, 8:03 AM
|
LAPE
Joined 16 Aug 2004
19 posts
|
I have a Baotian bought July 2004. It is working more or less fine. However the electric start does not work anymore. I can kick-start it however.
Sometimes a weak buzzing sound comes from the start motor but most of the time it is completely dead when I press the start button. Does anybody know a solution, or experienced this problem? Is it easy to take out the start motor?
Best Regards
Lars P
|
Baotian 50cc 4stroke help?
18 January 2005, 2:06 PM
|
Mac42
Joined 26 Dec 2004
7 posts
|
i think you will find that if you fully charge the battery then the starter should work..........i had the same problem and read somewhere that the battery voltage needed to be above 11volts....... Does anyone know how to de-restrict the scooter?
|
Baotian 50cc 4stroke help?
18 January 2005, 2:35 PM
|
reale
Joined 2 Aug 2004
13 posts
|
Hello Lars!
My starter stoped to function quiet soon. I took of the hood in front of the steerin an found the cables loose. the cables that need to be there to control the stop light behind!
Does the stop light function?
Good luck from Sweden!!
|
Baotian 50cc 4stroke help?
18 January 2005, 8:29 PM
|
lynda
Joined 13 Jan 2005
22 posts
|
thanks but it seems to be a part that is under the seat a round silver part that the fuel part is attached to - this seems to be smalled and therefore fuel not getting through - does anyone know what this part is called as the bloke i bought it off doesn't know what i am talking about - it looks like a flying saucer and has a bit coming off it that the fuel pipe attaches to - this bit has snapped, its only about 2 inches and situated under the seat near the fuel tank.
|
Baotian 50cc 4stroke help?
18 January 2005, 11:14 PM
|
slazaris
Joined 12 Nov 2004
5 posts
|
About the fuel supply, I believe that the problem is the fuel switch. It is a valve that lets fuel flow only when under pressure. So, this switch lets fuel pass through only when you move the throttle. This fuel switch is situated on the right of the scooter under the seat and the fuel tank. You will have to remove the right-side plastic in order to change it. My technician told me that this switch is often faulty and lets fuel pass through continously, thus choking the engine. So if anyone has stalling problems and assumes it is due to fuel supply, I suggest checking that switch. I myself faced stalling problems which were caused by too tight setting of the two valves of the engine. Bu that is something that should be done by an experienced technician if you don't know what you are doing.
|
Baotian 50cc 4stroke help?
19 January 2005, 1:48 PM
|
lynda
Joined 13 Jan 2005
22 posts
|
thanks i will pass this info to my husband who is trying to sort the bike out for me. will let you know the outcome
|
Baotian 50cc 4stroke help?
19 January 2005, 10:36 PM
|
wappan
Joined 10 Jan 2005
5 posts
|
Just a question have you taken out the brass pin to de-restrict it?
|
Baotian 50cc 4stroke help?
19 January 2005, 10:44 PM
|
wappan
Joined 10 Jan 2005
5 posts
|
The reason asking is i have sorted my stalling problem out, when i removed the brass pin, on the spring is a white clip and and when the needle lifts inside the carb (to allow more fuel through), the white clip kept getting stuck to the top of the cap, scince removing the white clip i havent had any stalling problems, that was about 2 hours ago so fingers crossed.
Kevin
|
Baotian 50cc 4stroke help?
20 January 2005, 6:28 PM
|
lynda
Joined 13 Jan 2005
22 posts
|
thanks - no it isn't deristricted only just got it - we are going to have a good look sat when our bike man comes round so will pas your info onto him and see if this helps. will let you know how i get on
Messages 221
to 240
of
2749.
< Previous
1
...
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
...
138
Next >
Important Note
All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.
You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.
|
