Preloved
ClassifiedsForumsReviewsMembersThe Joy of Second Hand

Baotian 50cc 4stroke help?

Messages 61 to 80 of 3133.

« Previous  1  2  3  4  5  6  7  8  9  10  11  12  13  14  ...  157  Next »


Baotian 50cc 4stroke help?
11 October 2004, 10:48 PM
reale
Joined 2 Aug 2004
13 posts

Hi!
I bought this moped at a very low price i Sweden. There has be no problem, the only one was that the cables from the brake handle got loose. But that was easy to fix. I have driven 210 km and now I have put it down, it's cold here. I hav'nt manipulated it yet, I think that have to wait untill it's ready for it, maybe after 500 km. You can use Castrol GPS 10W-40 for the motor and Castrol MTX 10w-40 for the gear. I chanced the oils when the moped arraived. Chinese oils are not good! Good luck with your purchase!

Baotian 50cc 4stroke help?
11 October 2004, 11:21 PM
paulfitzy
Joined 11 Oct 2004
3 posts

can anyone help...i have cut the plastic bit back a fair bit , and screwed the copper threaded screw back in.. probably about 1cm +++ the bike goes quicker downhill, with a wind behind me,, but still struggles at 28-30 mph on normal roads, how far can i go with this chopping away thing? would a better carb make a difference? any other ideas on making it go faster?
i was overtaken by a 2 stroke 50cc. i must make this bike move!!

Baotian 50cc 4stroke help?
12 October 2004, 4:32 AM
John
Joined 12 Oct 2004
4 posts

Lars,
Can you e-mail me a manual on this scooter

John


Baotian 50cc 4stroke help?
12 October 2004, 6:59 AM
LAPE
Joined 16 Aug 2004
19 posts

Good Morning,
If you give me your e-mail address that can receive 3MB I e-mail it to you.
B Rgds
Lars

Baotian 50cc 4stroke help?
12 October 2004, 10:43 AM
Webbo_UK
Joined 5 Oct 2004
9 posts

Hi Lars,

Could you send me the manual please [Log in to view email]

Many Thanks

Grant



Baotian 50cc 4stroke help?
12 October 2004, 12:34 PM
Webbo_UK
Joined 5 Oct 2004
9 posts

Hi All,

My fuel guage isnt working, people see to be aware of this issue can someone tell me how to fix [Log in to view email]

Many Thanks

Grant


Baotian 50cc 4stroke help?
12 October 2004, 2:18 PM
John
Joined 12 Oct 2004
4 posts

Hello Lars

Can you send the manual to [Log in to view email]

Regards

John


Baotian 50cc 4stroke help?
15 October 2004, 7:19 PM
linda
Joined 26 Aug 2004
57 posts

Hi Phil, I only paid what the man quoted. No addministration fee. I thing they are having a laugh.

Baotian 50cc 4stroke help?
15 October 2004, 7:41 PM
linda
Joined 26 Aug 2004
57 posts

Hi ,would you be able to send me a manual as well. Thankyou Linda. email [Log in to view email]

Baotian 50cc 4stroke help?
16 October 2004, 0:15 AM
paulfitzy
Joined 11 Oct 2004
3 posts

ok... this is how to make the bike go faster...remove the brass screw from the carb(under seat) completely !!dont bother cutting anything ! also, if you then peel off the flange cover, you will get to the needle which goes into carb...the needle has a small washer with approx. 5 settings on it..lower it down to the 2nd to last.. (taking the advice of other forum users)... put it together, and ....... top speed ,up to now , 51mph !!! honestly ..this works!! I struggled at 28-30 mph for weeks..(felt like binning the bike). and then ..this week..i RIDE with Gusto!! average top end is 43 mph flat......downhill ...HOLD ON!! any queeries...let me know!

Adverts Currently On Preloved - Place an ad here for free


FOR SALE
125cc SUKIDA CHINESE INPORT 2007 1YRS TAX M.O.T APRIL2010
Stoke-on-trent, Staffordshire, UK
  FOR SALE
LAMBRETTA LD125(1957) LOG BOOK IN MY NAME
Birmingham, Westmidlands, UK
 
FOR SALE
SKYTEAM 3SM 50cc trials motorcycle scooter moped Trail
Cannock, Staffordshire, UK
  FOR SALE
Piaggio skipper ST 125
Chatham, Kent, UK
 
 
[More mopeds and scooters ads...]

Baotian 50cc 4stroke help?
16 October 2004, 12:12 PM
Webbo_UK
Joined 5 Oct 2004
9 posts

thanks for the info paulfitzy, but i am still stuggling to find the pin that goes into the carb

" if you then peel off the flange cover, you will get to the needle which goes into carb "

Can you give me more info as to where this flange is please ?

Many [Log in to view email]


Baotian 50cc 4stroke help?
16 October 2004, 12:29 PM
Dizzy
Joined 26 Jul 2004
12 posts

nice...
listen to this mans advice he is spot on..

Well this week has been eventfull in the life of my bike..
i had kids try to nick it and naff up me steering lock and ignition barrel, but i delt with that, but they smashed an indicator trying..
and also yesturday outside the train station go to whack it on the main stand and it SNAPS.. thats right snaps.. but the good people at trade imports uk said they will send me both a new stand and a new indicator:D lovely..

other than minor little things i have now done 2700+ miles and still flying, all weather.....
Let me know how your bikes are getting [Log in to view email]


Baotian 50cc 4stroke help?
16 October 2004, 12:31 PM
Dizzy
Joined 26 Jul 2004
12 posts

the flange cover is like a orange yellow bit and its real soft.. be carefull as ya take it out.. its the soft bit you see directly in front of you.. UNDER that there is the pin, it threads thru the soft orange flange bit... you will see the notchs on the pin and as paulfitzy said second pin , or first

Baotian 50cc 4stroke help?
16 October 2004, 12:33 PM
Dizzy
Joined 26 Jul 2004
12 posts

if anyone has the manual and dont mind sending it to me i would be most grateful...

will have to send it to [Log in to view email] if you can

Thanks


Baotian 50cc 4stroke help?
16 October 2004, 6:47 PM
Webbo_UK
Joined 5 Oct 2004
9 posts

Got it, thanks Dizzy !


Baotian 50cc 4stroke help?
17 October 2004, 11:13 AM
kestrel
Joined 28 Sep 2004
16 posts

Linda,

Still no word from insurance brokers - they are thinking I will just go away but I will report them to FSA next & see what happens....

For those with fuel gauge problems, listen up:-

My son's gauge was stuck on full for ages (160kms) then started dropping like a stone afterwards - so it is working - albeit not very well...

Phil 17/10/04


Baotian 50cc 4stroke help?
17 October 2004, 4:49 PM
kev1
Joined 17 Oct 2004
6 posts

HELP! just got my baotian other day. started first time on half a tank. I then tried it on a full tank and it wouldnt start! the kick start seems to be a waste of time aswell. Can anyone please help??

Baotian 50cc 4stroke help?
17 October 2004, 5:19 PM
Webbo_UK
Joined 5 Oct 2004
9 posts

Make sure the side stand is not down.

I had a starting problem with mine, it was that i was trying to start it with it down.

Not sure if that helps


Baotian 50cc 4stroke help?
17 October 2004, 7:10 PM
kev1
Joined 17 Oct 2004
6 posts

just tried it now, started first time (i feel such a bulb!)
thanks alot

Baotian 50cc 4stroke help?
17 October 2004, 10:22 PM
Webbo_UK
Joined 5 Oct 2004
9 posts

no probs

i doubt i was the first and im pretty sure you wont be the last :)


Messages 61 to 80 of 3133.

« Previous  1  2  3  4  5  6  7  8  9  10  11  12  13  14  ...  157  Next »

 

Important Note

All messages are submitted by visitors to this web site, and represent their own personal opinion. They do not necessarily represent the views or opinions of Preloved.

You use this information at your own risk. Preloved can not be held responsible for any damages or loss resulting from the use of this site. Please see our Terms and Conditions for more details.

Not a member yet?

Why not join the fun for free! Members can sell their stuff completely free of charge, have searches prioritised for their local area, and lots more.

Join for free | Member Log In